Author name: admin

Direct use of renewable energy such as wind and solar energy is not as efficient unless we store it for later use. Of course, we can do this with storage batteries such as deep cycles (lead-acid, lithium-ion batteries, etc.). Keep in mind that the battery only stores direct current instead of alternating current. In this

Electrical connection Installation of distribution board with circuit breaker (single-phase domestic supply from utility pole and electricity meter to consumer unit) What is a distribution board? A switchboard is a safe system designed for a house or building that contains protective devices, disconnections, circuit breakers and fuses for the safe connection of cables and conductors

Wiring of any PLC is one of basic task in PLC Programming. There are two way of wiring any PLC input side. 1: Sink wiring 2: Source wiring First of all we discuss about the sink wiring. In this wiring we connect the Postive terminal of the Powe supply with S/S (Sink/Source Pin) or in

There are more than 100 Protection Function use in the Electrical Power and Switchgear Devices also known Device number. Must be remember by Electrical Engineer before any interview. ANSI Standard Device NumbersProtective relays are generally referred to by standard device numbers.Device Numbers are1 – Master Element2 – Time Delay Starting or Closing Relay3 – Checking

GENERAL & WIRING NOTES: ALL ELECTRICAL WORKS PERTAINING TO WIRING OF ELECTRICAL SYSTEMS SHALL STRICTLY CONFORM TO IEE LATEST EDITION OF RULES & REGULATIONS. ALL WIRING SHALL BE DONE IN PVC CONDUIT TO BE CONCEALED IN WALLS, SLABS, COLUMNS & FLOOR OR AS SHOWN ON DRAWINGS. OR AS SHOWN ON DRAWINGS.  THE WIRING SHOULD BE