Single Phase wiring Circuit for Button and Lamp Control
One Lamp Control with One Switch
This is the Common circuit use in the wiring of Single Phase circuits.
In this circuit we use One “Switch One Way” or SPST Switch I.e. Single Pole Single Throw Switch and Lamp with holder to complete the wiring.
The Complete Detail diagram is below.
Two Lamps Control with One Switch
This is the Common circuit use in the wiring of Single Phase wiring circuits.
In this circuit we use One “Switch One Way” or SPST Switch I.e. Single Pole Single Throw Switch and two Lamps with two holders to complete the wiring.
The Complete Detail diagram is below.
One Socket Control with One Switch
In this Circuit One Socket is Controlled with one switch
Stair Case Circuit | One Lamp Control with Two Switches
This Circuit is used in the Stairs for the Purpose of Stairs Light. See below the Circuit.
Two Lamps Control with One Switch in Series
In this Circuit there are two lamps are in series which we use for testing purpose. This circuit is used to detect the phases in 3 Phase circuit.
Procedure:
When Place both end of the Lamps on two phase the Lamps will glow usual.
But if you place two terminals of the Series lamp circuit on phase and neutral than both lamps will glow half.
Tunnel Circuit | Godam Circuit
This Circuit is used in the tunnel or GODAM let check the circuit.
Home Wiring Circuits Video
Fan Regulator Wiring
Fan regulator wiring Diagram is Given Below Please check
